Coming together...
Made a little progress today...
-Finished drilling holes in my little support brackets for my air manifold, then cleaned them up with the Dremel and gave them a coat of primer and flat black.
-Added a couple oz. of compressor oil to the compressor, so it's good to go for a few test runs.
-Gave it a run test - found out my leader hose was installed backwards (don't know why I thought I had it on right - there's no arrow on the check valve in my defense though). Flipped that around and it seems to be pretty happy just plugging along.
-Bolted up my air manifold to the fender using the little brackets - oh yeah had a $1.58 parts run to Ace Hardware. This thing sits really close to the hood support rod. I knew that was going to be the case, but I got it just in the perfect spot. It's not so much a problem with my manifold but more with the pressure gauge and pressure switch, I had to be a little careful where I put those. I had to get a little creative with the brackets as well because of the VSV that one bracket has to share mounting points with.
-Took some measurements for the last item - mounting the filter/coalescer. Going to pick up some stuff tomorrow to get that a little closer. Hopefully I'm going to get my clip-on air chuck tomorrow or Tuesday, so I can get this thing wrapped up! Still have a little electrical to do, been waiting on my 90/120 pressure switch from 4WheelParts (going to return the 110/145). They said it was going to be here a week ago Monday, then this past Thursday, then tomorrow
Good thing I'm not quite ready for it yet.
-Still have to get my relay bolted on somewhere and wired in.