IH8RUST: FJ60
- Thread starter IH8RUST
- Start date
CardinalFJ60
Rising Sun Member
It’s just so great. 
justcruisin
Wincher
...and for that price I would expect absolute perfection too. Arghhh.Maybe don’t sell parts that aren’t correctly measured, just a thought and I’m absolutely not amused. Kinda pissed off that I’ve spent money on an inferior product design.
IH8RUST
Trail Ready
- Joined
- Jun 13, 2024
- Messages
- 490
I just got off the phone with him. I'm annoyed that I have to go out of my way to fix something that was meant to be bolt-on, so I'll ask someone local to relocate the latch, tig weld, then send it back to their shop for re-powder coating. He's nice enough to reimburse the cost. I get that there is a QC issue, but I don't want to be part of that convo.
KC Masterpiece
Hard Core 4+
- Joined
- May 4, 2019
- Messages
- 2,104
I should get those grommets. Since that area is rust prone, I sprayed a bunch of fluid film in mine when I did the interior of the frame.@timmbuck2 told me to get my act together and finish the rig so I can join them on the 60 run, project planning all the interior work now, trying to figure out headliner color since I get one shot at it.
Meanwhile, found the grommets for the rocker panel. Also, those holes, they need plugs. Before I plugged them, I used the compressor to blow out stuff, about 10lbs of sandblast media. Very important things.
Installed the driver's side quarter panel emblem.
IH8RUST
Trail Ready
- Joined
- Jun 13, 2024
- Messages
- 490
90950-01006 is the part number, I got it from Cruiser Parts (net).
IH8RUST
Trail Ready
- Joined
- Jun 13, 2024
- Messages
- 490
I never returned the equipment, and I'm glad I didn’t. Took the time to strip their coating, media blasted it. Prebaked it to 100 degrees, then powder, and finally, baked it till it reached 400 for 40 minutes, just pulled it. So far, it looks like it might have worked.
 |  |  |  |
 |  |  |
