• DECEMBER CLUB HOLIDAY PARTY!!!
    Hi Guest: The RS holiday party will be on Friday, December 11 at 7:00 p.m. The holiday party will be held indoors at the fabulous Golden Gate Canyon Grange. Click here for details and directions. Please note that there will not be a meeting on the first Wednesday of December -- the holiday party will serve as our official meeting instead.

Weird Speakers Issue

Stuckinthe80s

Rising Sun Member
Joined
Dec 29, 2017
Messages
2,396
Location
Lakewood, CO
I've been having this weird issue with my speakers for the last year or so that I think may be a ground issue.

Last year I installed 4 new speakers, one in each door and a new head unit. It worked great, and usually works great until it rains. When that happens, the normal sound goes away and a high pitched squeal happens until I blow the 10A fuse that feeds power to the radio/interior lights. Once everything dries up, I usually replace the fuse and all is good again until it rains again. However, now the sound is pretty constant so I'm trying to figure out the source.

I've wanted to track this down for a while so I started troubleshooting. A lot of things were changed at the same time I did the radio install so I'll list those out now:
1. Replaced factory antenna with CB antenna mount from Wagon Gear. This requires a ground path as well as utilizing a CB/FM splitter so it can act as both antennas
2. The passenger rear door did not have a factory speaker. It was weird, there was a speaker cover, a wire ran and a hole cut out for one but nothing there. I spliced into the wire that was ran and all was good.
3. Around the same time as the speaker install, I installed a water bladder in the rear passenger quarter panel. This required the removal of the factory amp and sub woofer. I didn't terminate the speaker wire, just pulled the plugs out of the way and installed the bladder.
4. I utilized a wire adapter to plug into the factory harness because why not.

SO, my troubleshooting steps so far:
1. disconnected the antenna, played the radio, still had the squealing.
2. I pulled the head unit, disconnected the harness, turned the truck on, still had the squealing.

This is when I stopped because it is really weird to me. Doesn't the radio provide power to the speakers? How are the speakers making any sounds if everything is disconnected? I'm to the point now where I'm just going to run my own wires to each speaker and bypass any of the factory stuff. However, ground issues scare me from all of the horror stories I've read on people's trucks catching on fire so is this what that is? And if it is, how are the speakers making sound if there is no power applied?
 

DaveInDenver

Rising Sun Ham Guru
Joined
Jun 8, 2006
Messages
14,375
Location
Grand Junction
I thought 80 series radios have two amps, one for the sub and another for the main speakers. I don't know if the head unit/radio and the amp are located together. If you only pulled the head unit but did not disconnect the amp that would be a potential source for noise.
 

DaveInDenver

Rising Sun Ham Guru
Joined
Jun 8, 2006
Messages
14,375
Location
Grand Junction
Now this is from a 1994 FSM, so might not apply to your 1992. You mention a 10A that supplies radio and interior lights so it would seem if it's similar it's the one powering the component amp (on page 2).

Just looking at it the way the speakers are connected to both the head unit and component amp is odd. Not sure why.

EWD_94FZJ80_Radio_pg1.jpg
EWD_94FZJ80_Radio_pg2.jpg
 
Last edited:

Stuckinthe80s

Rising Sun Member
Joined
Dec 29, 2017
Messages
2,396
Location
Lakewood, CO
I thought 80 series radios have two amps, one for the sub and another for the main speakers. I don't know if the head unit/radio and the amp are located together. If you only pulled the head unit but did not disconnect the amp that would be a potential source for noise.
Oh, I think you're right! I think it is behind the passenger side speaker on the bottom side of the dash.
Who'd of thought looking at the wiring schematic in the FSM would be a good place to start?

@Lars @Hulk can I just delete this thread? I feel dumb now. :hill:
 
Last edited:

twentyfooteighty

Cruise Moab Committee
Cruise Moab Committee
Joined
Nov 28, 2018
Messages
1,319
Location
Salida, CO
wondering if that factory amp in the dash is getting moisture and shorting out?
 

Stuckinthe80s

Rising Sun Member
Joined
Dec 29, 2017
Messages
2,396
Location
Lakewood, CO
wondering if that factory amp in the dash is getting moisture and shorting out?
There's a good chance. My windshield leaks pretty badly.
 

nuclearlemon

Hard Core 4+
Joined
Aug 23, 2005
Messages
8,771
Location
windy wyo
i didn't have a factory amp anymore, but the plug on the right hand rear quarter panel would get water splashed up in it and blow the same fuse. i put the plug in a bag and taped it up and no more issues.
 

Inukshuk

Rising Sun Member
Joined
Aug 24, 2005
Messages
8,711
Location
Denver, CO
i didn't have a factory amp anymore, but the plug on the right hand rear quarter panel would get water splashed up in it and blow the same fuse. i put the plug in a bag and taped it up and no more issues.

@nuclearlemon didn't we both deal with this like 10 years ago! I guess Nic IS @Stuckinthe80s :LOL::ROFLMAO::LOL::ROFLMAO:

PS> Replacing all my old fuses with newer ones is what finally made weird electrical issues go away.
 

Hulk

RS Webmaster
Staff member
Cruise Moab Committee
Joined
Aug 22, 2005
Messages
18,222
Location
Centennial
That factory amp behind the glovebox was responsible for a constant drain on my battery. I removed it from the truck completely.
 

Stuckinthe80s

Rising Sun Member
Joined
Dec 29, 2017
Messages
2,396
Location
Lakewood, CO
I was trying to find a different thread of mine and realized I didn't properly close this one out either.

I removed the factory amp and all was good after that! The noise never came back!
 

Hulk

RS Webmaster
Staff member
Cruise Moab Committee
Joined
Aug 22, 2005
Messages
18,222
Location
Centennial
This is good information. That stupid little factory amp is a reliable source of trouble.
 

DaveInDenver

Rising Sun Ham Guru
Joined
Jun 8, 2006
Messages
14,375
Location
Grand Junction
I think the 3FE was to blame all along. :p
It's probably got to do with outfitting a tractor with leather seats. The 3FE is all like "Oh no you didn't, not on my watch." And it goes full monkey wrench gang on ya.

See, the problem here, though is the karma you're flaunting. The theory goes *something* will always be broken. That's just a fact of life. If you fix the minor things you're going to risk something important going. So you gotta leave a speaker or overhead light broken to prevent throwing a rod or stripping teeth off your ring gear.
 
Last edited:

Crash

Rising Sun Member
Joined
Aug 23, 2005
Messages
4,878
Location
Denver
It's probably got to do with outfitting a tractor with leather seats. The 3FE is all like "Oh no you didn't, not on my watch." And it goes full monkey wrench gang on ya.

See, the problem here, though is the karma you're flaunting. The theory goes *something* will always be broken. That's just a fact of life. If you fix the minor things you're going to risk something important going. So you gotta leave a speaker or overhead light broken to prevent throwing a rod or stripping teeth off your ring gear.
Exactly!
 

Stuckinthe80s

Rising Sun Member
Joined
Dec 29, 2017
Messages
2,396
Location
Lakewood, CO
It's probably got to do with outfitting a tractor with leather seats. The 3FE is all like "Oh no you didn't, not on my watch." And it goes full monkey wrench gang on ya.

See, the problem here, though is the karma you're flaunting. The theory goes *something* will always be broken. That's just a fact of life. If you fix the minor things you're going to risk something important going. So you gotta leave a speaker or overhead light broken to prevent throwing a rod or stripping teeth off your ring gear.
This theory seems legit. Pick your poison.
 
Back
Top