What have you done to your rig today?

BMFS33

Brand New
Joined
Apr 28, 2026
Messages
7
What size tire are you running? I just ordered those same Methods for the LX.
I run 255/80/17 Falken WP AT4s most of the year. I run Nokian Hakkapelita 275/70/18s in the winter and will be moving away from the OEM wheels in the winter to Method 318s due to the 60 offset on the OEMs being too tight for the new BP51s and OME UCAs.
 

IoN6

Rising Sun Member
Joined
Sep 2, 2019
Messages
1,454
Location
Arvada
Replaced the long over due CV’s in the Tacoma today. Was no where near as bad as I made it out to be. Also changed the oil and rotated the tires and cleaned the rims 😮‍💨

Ready for another trip to the ranch though 🤘

IMG_8084.jpeg

IMG_8083.jpeg

IMG_8085.jpeg
 

BMFS33

Brand New
Joined
Apr 28, 2026
Messages
7
Winter tire swap and new wheels for my winter tire set up (Nokian Hakkapelitta LT3 275/70/18). I run 17" Falkens on Method 703s during the non snow season and the Hakkas only come in 18s (already had the set). Naturally, that means new wheels - Method 318's in bronze. Contrast with the summer set up.
 

Attachments

  • IMG_6795.jpeg
    IMG_6795.jpeg
    1.2 MB · Views: 9
  • IMG_6788.jpeg
    IMG_6788.jpeg
    762 KB · Views: 10
  • IMG_6790.jpeg
    IMG_6790.jpeg
    912.8 KB · Views: 15
  • IMG_6787.jpeg
    IMG_6787.jpeg
    775.3 KB · Views: 11
  • IMG_6772.jpeg
    IMG_6772.jpeg
    995.7 KB · Views: 11

rover67

Rising Sun Member
Joined
Nov 1, 2007
Messages
9,802
Location
Boulder, Co
Passed emissions! No funny business. Timing advanced for altitude, 1/4 tank of shitty low octane fuel from king Soopers, 33” bfg ats and the old gas cap. Basically just popped in on my way through town. It went for a ridiculously long time on the rollers and then the system signaled “re test OK” (maybe it failed?) and they went for it again and it passed. They didn’t open the hood, look under it, or check the OBD port. Just gas cap and rollers

IMG_6179.jpeg
 

brettf

Lifted
Joined
Feb 13, 2017
Messages
161
Location
Golden
Replaced the long over due CV’s in the Tacoma today. Was no where near as bad as I made it out to be. Also changed the oil and rotated the tires and cleaned the rims 😮‍💨

Ready for another trip to the ranch though 🤘
@IoN6 What steel braided lines are you using here?
 

On the RX

Rising Sun Member
Joined
Nov 19, 2016
Messages
2,403
Location
Superior
So far... one new UCA! 5.5 start to finish including removal of old UCA. I kept jumping in the house to peep the Buckeyes game. Next side should/could/ hopefully will be quicker!

17922788336029083294045815675205.jpg
 
Back
Top