ok, so I think my life is back to normal now, so back to the grind. Literally.
We have to complete a kiosk for the jenny creek trail head. I have almost all the materials.
I would like to have a work day this sunday if possible. I will need 2~3 bodies. You don't have to be a certified welder or anything like that. I will most likely be "sticking" the kiosk, due to the ridiculously thick material the rangers bought.
We need people to clean, sand, grind, and cut material. Must be able to measure twice and cut once. We will not be putting it together, only cutting the pieces and prepping for welding.
I also need about 4 feet of 1/2" cold or hot rolled round bar, and 4 feet of 1/2" id tube/pipe, either schd 40 or 80, or .125 wall.
I have all tools needed, providing the big arse sign post material will fit in my band saw. If not, we will torch it and clean the cuts.
WE WILL NEED THE FOLLOWING:
Beverages
1 gal acetone
4.5 flap wheels 80 and 120 grit. HF wheels need not apply
BYOG (bring your own gloves)
call w/questions 3oh3 9oh6 8693
We have to complete a kiosk for the jenny creek trail head. I have almost all the materials.
I would like to have a work day this sunday if possible. I will need 2~3 bodies. You don't have to be a certified welder or anything like that. I will most likely be "sticking" the kiosk, due to the ridiculously thick material the rangers bought.
We need people to clean, sand, grind, and cut material. Must be able to measure twice and cut once. We will not be putting it together, only cutting the pieces and prepping for welding.
I also need about 4 feet of 1/2" cold or hot rolled round bar, and 4 feet of 1/2" id tube/pipe, either schd 40 or 80, or .125 wall.
I have all tools needed, providing the big arse sign post material will fit in my band saw. If not, we will torch it and clean the cuts.
WE WILL NEED THE FOLLOWING:
Beverages
1 gal acetone
4.5 flap wheels 80 and 120 grit. HF wheels need not apply
BYOG (bring your own gloves)
call w/questions 3oh3 9oh6 8693