Gamiviti - new product

[Inukshuk]

Damn, when I saw the first pic I thought you made a polished signal cannon with a custom rammer.

for the custom version enter code "OUTLAWS" at checkout

 

[Hulk]

@nakman Your video skills get better with every video. This is great stuff.

 

[nakman]

Alright check this one out. I just got in my first shipment of these Up/Down Air EGOI2 air compressors from OVS... they are basically going right after ARB competing directly with the ARB Twin compressor. Serendipitously, I've got an ARB twin installed in the 200, so I installed the EGOI2 in the GX then did a comparison.

Air Solutions — Gamiviti

www.gamiviti.com

View: https://youtu.be/R6nHYDh3oAM

 

[ChewBaca]

Nice Review! Do you happen to know where I can get a mount fabricated for my 07 Sequoia? If so we are in business... I will look around and see if I can find a mount and be in touch. Thx.

 

[nakman]

Chewy, think it's the same as a Tundra from that year? Maybe this one gets you close:

ARB Twin Air Compressor Mounting Bracket (ARBTUN2G) for Toyota Tundra Gen 2 (2007-21)

Now that you have your new ARB Dual Air Compressor (CKMTA12) you need a place to put it but yet have easy access. Under the hood is the best location for this. It takes up no valuable cargo space and yet is easy to get to. ARB states heat from under the hood is not an issue. With the ARB dual...

mountainoffroad.com

 

[Romer]

Tim, great review. The manifold on the ARB is to run your air lockers. Is there a similar capability on the EGO and can you wire it to turn on in the cab to engage your locker?

 

[nakman]

Tim, great review. The manifold on the ARB is to run your air lockers. Is there a similar capability on the EGO and can you wire it to turn on in the cab to engage your locker?

You'd just need to plumb in a small remote reservoir if you wanted to do air lockers. Would be simple to do. Same with wiring a switch- just intercept the + wires (there's one for each compressor) with a relay harness... then you can remote switch it.

In my use cases I don't have any air lockers so really like the simplicity of less stuff.. and the switch right on top of the compressor.

 

[nakman]

in other news, I just put some OVS drawers in the GX470. if someone wants to touch/feel/test these out, lmk and I can bring it out to a future meeting or event. https://www.gamiviti.com/drawers


View: https://youtu.be/oxuNHZg6ZXI

 

[nakman]

Was doing a seat repair today, and took a little time to shoot video of the press tool. Whipped up this quick video:


View: https://youtu.be/L0rByhr0U3o


@IoN6 so psyched with how well these are working...

 

[IoN6]

Freakin' love it!

I'll get some sausage making video of the next batch.

 

[nakman]

Ok here's a new one... been working on this one for a while now, first launch of the Pull Pall mount! https://www.gamiviti.com/pull-pall

would like to thank @Romer for winning one of these at Cruise Moab, and then @satchel for having one then trading it to @Inukshuk in exchange for some ActionTrax.. who then let me borrow it to develop the mount solutions. Also thanks to @CardinalFJ60 who let me use his rack to do the video. And if I forgot anyone well thank you too, I'll say it again I wouldn't be doing this stuff without you guys.

Next step is mounting this to a rack so I can get some pics from outside the garage.. perhaps we can combine that with an actual demo of the product... until then, enjoy the video

View: https://youtu.be/nngkGScUo2M

 

[nakman]

Someone at the meeting tonight is going home with an Ironman 4x4 Rear Wheel Storage bag... adding this to the raffle.

Spare Tire Bags — Gamiviti

www.gamiviti.com

View: https://youtu.be/gxU7mebQbmw?si=8EJn6jXDwRS0Up-7

 

[Inukshuk]

Ok here's a new one... been working on this one for a while now, first launch of the Pull Pall mount! https://www.gamiviti.com/pull-pall

would like to thank @Romer for winning one of these at Cruise Moab, and then @satchel for having one then trading it to @Inukshuk in exchange for some ActionTrax.. who then let me borrow it to develop the mount solutions. Also thanks to @CardinalFJ60 who let me use his rack to do the video. And if I forgot anyone well thank you too, I'll say it again I wouldn't be doing this stuff without you guys.

Next step is mounting this to a rack so I can get some pics from outside the garage.. perhaps we can combine that with an actual demo of the product... until then, enjoy the video

View: https://youtu.be/nngkGScUo2M

Y'all can see the blade holder on my roof rack at tonight's meeting!

 

[nakman]

GX460 Dashboard Accessory Panels are finally released, in stock, and on the website. https://www.gamiviti.com/dashboard-accessory-mounts


View: https://youtu.be/r76AqVqM28w

 

[nakman]

Tundra dashboard accessory panels are now in stock! really like this one...


View: https://youtu.be/hLHjRLukF9g


@Johnny Utah I am setting one aside for you.

 

[Johnny Utah]

Haha! Thanks Tim. It might be a while. I’m not looking for a tundra anymore. Decided to keep the 100.

 

[nakman]

free keychain with any civilian spec Megacruiser rack.. order yours today!

and apologies in advance for polluting your social feeds... but I gotta.


View: https://www.instagram.com/reel/Cy1Cjbkg0h8/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==

 

[nakman]

how about an awning/tent organizer... you didn't even know you needed one of these.

awning organizer — Gamiviti

www.gamiviti.com

View: https://youtu.be/KU11G8Q_8tI


And I didn't realize I wanted one either until I set it up, now I'm hooked. So much so that I'm also doing a group buy on these for members

 

[nakman]

Tundra Doublecab install video... watch me drill holes in my new truck!


View: https://youtu.be/JL5qHZ9eUa4

tundra racks — Gamiviti

www.gamiviti.com

 

[nakman]

been a while... but quite a few products have been in the hopper lately so will have more updates shortly. Today is an exciting one, as I've got a new release of our rack receiver product to share.

This new design has all the same benefits as the old, while also providing an anti-tamper option, no more rattling, and simplified installation. You can see all of that in the video... also special thanks to club member Sean @Sean Solo for being a sounding board on the CAD model here, and providing some really good suggestions. and also thanks to other club member Shawn @CardinalFJ60 for allowing use of his truck and also being a part of the video today.



View: https://youtu.be/Fp5t0Yn8jlE