Cruisertrash
Rising Sun Member
Last piece of the puzzle for my t-case refresh. Like I mentioned in the post about the flywheel, I have a spare H42 and I’d like to build this spare t-case onto it while both are on the bench. But I need the bolts to attach the front half of the split case to the H42.
This is an early 60 with no spacer, so I need the discontinued shorter bolts. I’ve heard there are off-label substitutes from Toyota that work but so far nobody has been willing to give up their secret on that. Don at Groove has come up with nothing and I’ve even dug into making sense of part numbers and whether or not they indicate bolt hardness, width, and length - they kind of do, but don’t 100% follow a pattern. Not enough to be certain.
Any help (or bolts) appreciated!
This is an early 60 with no spacer, so I need the discontinued shorter bolts. I’ve heard there are off-label substitutes from Toyota that work but so far nobody has been willing to give up their secret on that. Don at Groove has come up with nothing and I’ve even dug into making sense of part numbers and whether or not they indicate bolt hardness, width, and length - they kind of do, but don’t 100% follow a pattern. Not enough to be certain.
Any help (or bolts) appreciated!