mosdefjeff
Trail Ready
Just mounted up a new Comeup 9.5rs. Remote is paired but will only spool in or out momentarily and the "sync" alarm sounds. With the wired remote, I get this when spooling in or out. When the drum stops I get a constant alarm sound that isn't mentioned in troubleshooting and then changes to the staggered beeps asking me to sync again. All the while the remote light shows green.
The speed seems to be there, but the chatter has me worried:
Start battery is a 700 cca that's never given me problems (including with my old Smittybilt 12k lb winch) and is at full charge with the engine off (12.5-6). That's 50 cca more than required by Comeup. I also have an Odyssey AGM model 34R-790 and this video was filmed with my Bluesea solenoid closed. 14.4 v at start battery terminals.
I have a call into Comeup engineering regarding the contactor chatter. Initially thought to be a voltage issue, myself and customer service are left scratching our heads. I'll wait to hear from them next week but thought I'd get some input here.
The speed seems to be there, but the chatter has me worried:
Start battery is a 700 cca that's never given me problems (including with my old Smittybilt 12k lb winch) and is at full charge with the engine off (12.5-6). That's 50 cca more than required by Comeup. I also have an Odyssey AGM model 34R-790 and this video was filmed with my Bluesea solenoid closed. 14.4 v at start battery terminals.
I have a call into Comeup engineering regarding the contactor chatter. Initially thought to be a voltage issue, myself and customer service are left scratching our heads. I'll wait to hear from them next week but thought I'd get some input here.
Last edited: