Tip Over Challenge stock

BryanF

0
Joined
Apr 8, 2010
Messages
18
Location
Patterson, MO
For all who couldn't be on a great run Friday on Hells Revenge here is Ben up Tip Over Challenge in the 2010 4runner
Watch the A-Trac work when he pulls the wheel up. Enjoy:cheers:
 
Last edited:

Vitesse_6

Wasatch Cruisers
Joined
Sep 15, 2005
Messages
191
Location
Taylorsville, Utah
Minor detail, But wasn't this Fri.
I had the two tone 80 in front of him.
 

BryanF

0
Joined
Apr 8, 2010
Messages
18
Location
Patterson, MO
Yeah it was. The days all run together. Fixed it
From the order of the pics I think this is you
CM2010147.jpg


CM2010149.jpg
 

Vitesse_6

Wasatch Cruisers
Joined
Sep 15, 2005
Messages
191
Location
Taylorsville, Utah
Why yes, Thank you, It was a great trail as usual.
 

AxleIke

Hard Core 4+
Joined
Apr 20, 2006
Messages
4,747
Location
Broomfield, CO
Cool vid!

Huge difference in 5 generations.

My 87 runner on 35's sits about 2 inches lower than a brand new runner at the rooflines.

I can also see the top of the lower trim on the door under mine when looking from the side.
 

subzali

Hard Core 4+
Joined
Aug 22, 2005
Messages
10,805
Location
Denver CO
SO much more finesse than driving a mostly stock FJ40 up that obstacle! Impressive!
 
Joined
Jan 5, 2006
Messages
623
Location
Everywhere, USA
Hatfield drove his open 55 right up TOC a few years back with several Rubicon guys watching....A couple even took the bypass. Great fun.
 

DaveInDenver

Rising Sun Ham Guru
Joined
Jun 8, 2006
Messages
14,344
Location
Grand Junction
Cool vid!

Huge difference in 5 generations.

My 87 runner on 35's sits about 2 inches lower than a brand new runner at the rooflines.

I can also see the top of the lower trim on the door under mine when looking from the side.
But did our old junk never wheeled that smooth 100% stock either. That 4th gen we had for a while was much nicer to ride in on I-70, too. The new stuff isn't all bad.
 

Three Wheel Ben

Trail Ready
Joined
Sep 12, 2005
Messages
441
Location
Centennial
For the record it's not bone stock. 2" spacer lift and of course the bling 20's. Everything else is stock.

Thanks for sharing the vid Brian.

It looks as fun outside as it was inside.
 

AxleIke

Hard Core 4+
Joined
Apr 20, 2006
Messages
4,747
Location
Broomfield, CO
But did our old junk never wheeled that smooth 100% stock either. That 4th gen we had for a while was much nicer to ride in on I-70, too. The new stuff isn't all bad.

No. I wasn't saying its bad, just different. I'd take a 5th gen any day for light wheeling and highway cruising. If they are anything like the 4th gens, they are WAY nicer than my old POS. At least you can run on the highway without going deaf, and you can actually hit 75 mph on an uphill :D
 
Back
Top