FREE 80 series links and arms.

[KC Masterpiece]

I have a full set of 80 series factory links and arms. All bushings are probably in need of replacement before going back into service.

One of the rear trailing arms looks like it may have a very slight bend to it. My eyes may be playing tricks on me.

Free to a good home.

 

[subzali]

I am interested in the front arms. Mine may have been bent in the accident. In steamboat could pick up Tuesday.

 

[KC Masterpiece]

I am interested in the front arms. Mine may have been bent in the accident. In steamboat could pick up Tuesday.

All yours. Fronts are definitely straight.

 

[LARGEONE]

I also have the "club set" of extra front arms should anyone need them.

Also, I would consider sleeving the rear lowers with DOM tube prior to installing new bushings. One of the best mods I have done to my 80. I have dragged the sleeved lowers over so many rocks and they have not bent like to stock OEM ones did. You can also lengthen the lowers at the same time you have them cut apart which fixes the rear pinion angle rotating it down close to stock.