• Jack-it Night: April 2024 RS Meeting Hey Guest: Wed. April 3rd is the next Rising Sun meeting, and you won't want to miss it. We're doing our annual offroad recovery equipment demonstration and trail skills training aka "Jack It Night." Meeting starts at 6:30 p.m. (early) Click here for all the details.

3FE Head, manifolds, fuel rail, injectors

Joined
May 8, 2008
Messages
587
Location
Colorado Springs
I have a freshly built head with oversize SS valves, new springs, etc never installed. Plus the full set of hardware in the description for $500.
 

Crash

Rising Sun Member
Joined
Aug 23, 2005
Messages
3,834
Location
Denver
Sounds good and thanks for the reply. I’m thinking it over.
 
Joined
May 8, 2008
Messages
587
Location
Colorado Springs
Sounds good and thanks for the reply. I’m thinking it over.

As I was taking pictures I realized I had only installed half the valves so I'm including my complete valve hardware collection along with a height micrometer so you can finish the job. I also realized I had Robbie do some work on the valve bowels to un-shroud them so it should flow better than stock. I should have also mentioned I hand picked the springs from several new sets to match them for height under load.

Also there are two sets of standard 3FE injectors, all were ultrasonically cleaned and flow tested with new pintle covers installed ( some people refer to that as "rebuilding", I consider that abuse of the language though)
IMG_20200824_130252517.jpg
IMG_20200824_130310723.jpg
IMG_20200824_130304941.jpg
 

Attachments

  • IMG_20200824_125343771.jpg
    IMG_20200824_125343771.jpg
    508.2 KB · Views: 133
  • IMG_20200824_125338044.jpg
    IMG_20200824_125338044.jpg
    271.1 KB · Views: 118
Top