• Jack-it Night: April 2024 RS Meeting Hey Guest: Wed. April 3rd is the next Rising Sun meeting, and you won't want to miss it. We're doing our annual offroad recovery equipment demonstration and trail skills training aka "Jack It Night." Meeting starts at 6:30 p.m. (early) Click here for all the details.

Gamiviti - new product

Johnny Utah

Rising Sun Member
Joined
Mar 6, 2015
Messages
1,067
Location
Arvada
Cool product! I love it when people solve problems or rather find solutions in such creative ways! Great job Tim! I’d like to try one out for sure!
 

Shuksan

Rising Sun Member
Joined
Nov 1, 2017
Messages
906
Location
Denver
And I just got stock of my newest product, our plastic shoulder belt mic holder. Back story with this one is I designed this out of sheet metal in 2016, and it worked fine but was a little tough to get dialed in, and I never liked the sharp edges. But this year decided to revamp it, and also add a few new features also, like the ability to tweak in the grip with the seatbelt, dial in the grip with the mic, and engage it with the belt clips of smaller hand helds, etc.
View attachment 94963
View attachment 94964
View attachment 94965

And the Rising Sun connection is I enlisted the help of Sean @Pro Designer here to help with the design work, who made this product way better than I could have done on my own. thanks again, Sean! :bowdown:

here's a link to the page: http://www.gamiviti.com/mic-holders

and special bonus if you're one of the 3 people who actually follow this thread, hit me up and I'll give you one of these at the June meeting. :bolt:
I will gladly pay for one, but can't decide blue/green. Might have to get both.
 

Shuksan

Rising Sun Member
Joined
Nov 1, 2017
Messages
906
Location
Denver
While it might add to manufacturing costs, we really need some with toyota racing stripes
 

Inukshuk

Rising Sun Member
Joined
Aug 24, 2005
Messages
7,271
Location
Denver, CO
Can you post a photo of the back of the clip when a midland HT is in it.

Change: "Hold any hand mic from your CB, Ham radio, or remote mic from a handheld." to "Hold any hand mic from your GMRS, HAM, CB, or remote mic from a handheld."

Change: "Hold your smaller handheld radios, including FRS, GMRS, and Ham radios." to "Clip on your handheld radios - FRS, GMRS, and HAM."
 

nakman

Club Secretary
Staff member
Moderator
Joined
Aug 23, 2005
Messages
14,548
Location
north side
hey Brian these are ABS, so you can paint them any color you like! :)

and Daniel thanks for the feedback, this will happen today. :thumb:
 

CardinalFJ60

Rising Sun Member
Joined
Aug 23, 2005
Messages
2,483
Location
Lafayette
Honestly, I don't know how I lived without this thing. I've been rocking it since CM and one thing I noticed is the ease at which I can blindly put the mic in as well as just talk while it's attached to the seatbelt. love, love love it.

file this under "best Mod well under $50"
 

nakman

Club Secretary
Staff member
Moderator
Joined
Aug 23, 2005
Messages
14,548
Location
north side
Honestly, I don't know how I lived without this thing. I've been rocking it since CM and one thing I noticed is the ease at which I can blindly put the mic in as well as just talk while it's attached to the seatbelt. love, love love it.

file this under "best Mod well under $50"
hey that's awesome, so glad you like this one Shawn!

And too bad CB is dying, as my Midland handheld clips into this thing really well...

IMG_3812.jpg

edit: I just realized that I seem to have a ton of radios... :rolleyes: :lmao:
 

mcgaskins

Rising Sun Member
Joined
Sep 14, 2012
Messages
1,898
Location
Denver, CO
And I just got stock of my newest product, our plastic shoulder belt mic holder. Back story with this one is I designed this out of sheet metal in 2016, and it worked fine but was a little tough to get dialed in, and I never liked the sharp edges. But this year decided to revamp it, and also add a few new features also, like the ability to tweak in the grip with the seatbelt, dial in the grip with the mic, and engage it with the belt clips of smaller hand helds, etc.
View attachment 94963
View attachment 94964
View attachment 94965

And the Rising Sun connection is I enlisted the help of Sean @Pro Designer here to help with the design work, who made this product way better than I could have done on my own. thanks again, Sean! :bowdown:

here's a link to the page: http://www.gamiviti.com/mic-holders

and special bonus if you're one of the 3 people who actually follow this thread, hit me up and I'll give you one of these at the June meeting. :bolt:

Sweet!! I usually clip my mic to my shirt pocket or onto the seatbelt and constantly fiddle with it. This is a great solution!
 

On the RX

Rising Sun Member
Joined
Nov 19, 2016
Messages
1,867
Location
Superior
And I just got stock of my newest product, our plastic shoulder belt mic holder. Back story with this one is I designed this out of sheet metal in 2016, and it worked fine but was a little tough to get dialed in, and I never liked the sharp edges. But this year decided to revamp it, and also add a few new features also, like the ability to tweak in the grip with the seatbelt, dial in the grip with the mic, and engage it with the belt clips of smaller hand helds, etc.
View attachment 94963
View attachment 94964
View attachment 94965

And the Rising Sun connection is I enlisted the help of Sean @Pro Designer here to help with the design work, who made this product way better than I could have done on my own. thanks again, Sean! :bowdown:

here's a link to the page: http://www.gamiviti.com/mic-holders

and special bonus if you're one of the 3 people who actually follow this thread, hit me up and I'll give you one of these at the June meeting. :bolt:
I would like to try this! I also don't mind throwing some cash your way.
 

nakman

Club Secretary
Staff member
Moderator
Joined
Aug 23, 2005
Messages
14,548
Location
north side
Ok new video is finally up... might take you 2 beers to get through this one but if you wanted to see the LT version of the OVS awnings, well here you go.



special thanks to @bassguyry for letting me borrow his awning for the demo!
 

bassguyry

Commander + Cruise Moab Chairman
Staff member
Moderator
Cruise Moab Committee
Joined
Jun 14, 2018
Messages
1,104
Location
Arvada, CO
Ok new video is finally up... might take you 2 beers to get through this one but if you wanted to see the LT version of the OVS awnings, well here you go.



special thanks to @bassguyry for letting me borrow his awning for the demo!

It's such a killer awning. Especially compared to my old and busted Batwing, which met its demise at Cruise Moab in April - @Johnny Utah witnessed the carnage. 🤣
 

nakman

Club Secretary
Staff member
Moderator
Joined
Aug 23, 2005
Messages
14,548
Location
north side
A customer sent this to me today... nice looking 80, and great endorsement of what we're doing here, as well as the great stuff down there at @sleeoffroad not sure where else to post it so will just stick it here. :)

 

Johnny Utah

Rising Sun Member
Joined
Mar 6, 2015
Messages
1,067
Location
Arvada
Great video! Thanks for sharing @nakman! The owner did a great job with the build and he spoke very well about Gamiviti!
Well done all around!
 

nakman

Club Secretary
Staff member
Moderator
Joined
Aug 23, 2005
Messages
14,548
Location
north side
Time for some 200 series specific Gamaviti products? 😎
definitely. what do you want to see?

wait- you get a 200?
 
Top