Rising Sun Member Forums  

Go Back   Rising Sun Member Forums > For Sale + Help > For Sale / Wanted

Notices

Reply
 
Thread Tools
  #1  
Old 09-30-2011, 11:15 AM
Ullr Ullr is offline
Rock Stacker
 
Join Date: Jan 2009
Location: Valhalla
Posts: 12
Default FS: IKEA FJ-40 (some assembly required)

I hate to do it but unemployment is forcing me to sell the project 40. The thread on mud is here.

In addition to what is in the build up thread the body work is almost done, with a whole new floor in the passenger area and the rear center channel and lower parts of both quarter panels. It just needs some touch up and the welding finished and it's ready for paint.

What I have:
- Brand new Marlin Crawler 4.7 Toybox
- Full set of cryo'd Poly Perf axles and Birf's, front and rear
- Frame that has been sandblasted, restored and painted with Zero Rust with a removable crossmember to accomodate the Toybox
- Rebuilt FJ 60 tranny with all new bearings and the Toybox output shaft installed
- SOA Rear axle has been stripped painted and rebuilt with all new bearings and seals, all new disc brakes with parking brake, and rebuilt diff with all new bearings and Poly Perf axles
- SOA Front axle has been stripped painted and is ready to be built with all new bearings and seals, all new disc brakes, Aisin hubs, etc (see pic)
- Clean title and registered as a collector vehicle
- Almost completely restored body, it has an all new floor, rear center channel and lower rear quarter panels, all that remains is to finish welding the small patches and paint it
- Engine has not been rebuilt but cleaned and painted with all new OEM bolts
- Electronic ignition
- At least $500 in NIB bearings and parts
- FJ 60 power steering (not installed) and FJ 60 knuckles
- FJ 60 transfer case (already mounted to the Toybox)
- Springs have been completely disassembled, stripped, painted with Zero Rust, had the military wrap reversed, and reassembled with all new anti-inversion shackles and spring pins
- All new clutch parts, flywheel has been turned and painted
- Two sets of steel wheels (one black, one white)
- Many spare parts accumulated over the years that are included
- Both FSM's, the factory emissions manual for 1976, and misc other manuals.
- Sandblaster (needs a new ceramic tip) and two bags of garnet sand (no silicosis)
- Anti squat bar made out of 1/4" wall DOM with Heims
- ~80-100' of .120 wall 2" DOM tubing(everything you need for a roll cage)
- ~100' of mixed 1" and 1.5" .120 wall DOM
- Engine stand in great condition that is modified to hold a 2F
- And everything else need to build a 40 except what is listed below. In addition all bolts that have gone back into the vehicle are brand new OEM from SOR.

What I don't: Driveshafts, high steer, seats, doors, hardtop

I do not have the time to part this out or ship it. I have $3k in the axles and Toybox and the body has to be worth something, plus there is thousands of dollars in parts and a clean title. Sold.
Attached Images
     

Last edited by Ullr; 10-16-2011 at 07:58 AM.
Reply With Quote
  #2  
Old 10-03-2011, 05:14 PM
Rezarf's Avatar
Rezarf Rezarf is offline
Hard Core 4+
 
Join Date: Aug 2005
Location: Louisville, CO
Posts: 3,990
Default

Wow Ian, sorry to see it go bud! I know the work and $$$ you have into that thing.

For anyone looking, this is a CLEAN build, with really no expense spared. If you have a complete 40 and want to give it a serious upgraded chasis/suspsension/crawl factor... this would be a no-brianer.

Sad to see it go man, best of luck with the sale, I bet it won't last long dude.

Drew
__________________
Rezarf <><
My rig... "Maude"
1976 FJ40 with some stuff and some leaks.

2001 Sequoia Limited with heated seats

My camping trailer build up thread.

"You 80 guys are just a Sawzall away from nirvana." -Red Chili
Reply With Quote
  #3  
Old 10-05-2011, 11:10 PM
Corbet's Avatar
Corbet Corbet is offline
Hard Core 4+
 
Join Date: Oct 2006
Location: Durango, Colorado
Posts: 3,912
Default

If only Bridger was older and ready to start building his own rig...

Good luck on the sale. Sorry it has to go.
__________________
Speski OffRoad LTD, Cargo Solutions for Toyota 4x4's http://www.SpeskiOffRoad.com
"80 series, with a fridge"
1976 FJ40, Project with little progress.
2004 Starcraft 10RT

Reply With Quote
  #4  
Old 10-07-2011, 08:23 AM
Ullr Ullr is offline
Rock Stacker
 
Join Date: Jan 2009
Location: Valhalla
Posts: 12
Default

Thanks guys. Bump for price drop.
Reply With Quote
  #5  
Old 10-08-2011, 01:29 PM
surffj62 surffj62 is offline
Wincher
 
Join Date: May 2011
Location: Erie Co
Posts: 51
Default

Where are you located?
Reply With Quote
  #6  
Old 10-08-2011, 02:58 PM
Ullr Ullr is offline
Rock Stacker
 
Join Date: Jan 2009
Location: Valhalla
Posts: 12
Default

Louisville.
Reply With Quote
  #7  
Old 10-10-2011, 09:21 AM
surffj62 surffj62 is offline
Wincher
 
Join Date: May 2011
Location: Erie Co
Posts: 51
Default

Im in Erie/Lafayette - pm me your number. I'd like to take a look at it.
Reply With Quote
  #8  
Old 10-16-2011, 07:59 AM
Ullr Ullr is offline
Rock Stacker
 
Join Date: Jan 2009
Location: Valhalla
Posts: 12
Default

Sold. Thanks Timm!
Reply With Quote
  #9  
Old 03-18-2012, 07:07 PM
timmbuck2's Avatar
timmbuck2 timmbuck2 is offline
Rising Sun Member
 
Join Date: Oct 2005
Location: Denver
Posts: 3,011
Default

While I bought this last October, thanks to my surgery I still have not picked most of it up...and it does not look like I will have time to work on it for months....maybe longer...so if someone wants to pick it alllll up for a great deal, let me know! The body and big stuff is still at Ian's house in Boulder, a lot of the little stuff is at my place in Golden.

Thanks!

Timm
__________________
* 00 LC
* 03 LX470 -
* 97 Saab Convertible -
* 99 Saab 9-3 Convertible
* stinky old Ford Diesel tow rig
KDěTIM
TLCA# 15572
TLCA Executive VP 2008-2011
CM Committee Member CM10, CM11
Reply With Quote
  #10  
Old 03-21-2012, 09:16 PM
timmbuck2's Avatar
timmbuck2 timmbuck2 is offline
Rising Sun Member
 
Join Date: Oct 2005
Location: Denver
Posts: 3,011
Default

sold, again!! Have fun Travis!
__________________
* 00 LC
* 03 LX470 -
* 97 Saab Convertible -
* 99 Saab 9-3 Convertible
* stinky old Ford Diesel tow rig
KDěTIM
TLCA# 15572
TLCA Executive VP 2008-2011
CM Committee Member CM10, CM11
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -6. The time now is 10:14 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.